|
Swimming Pool Deck Coatings - Patio TonesWe
offer a complete line of automatic swimming pool cleaners and parts, from
all the major manufactures. Sta-Rite, Arneson, Jandy,
Hayward, Baracuda, Letro, Kreepy Krauly and many more. Whether its
a single part or a complete swimming pool cleaner, we can supply your
needs. Cracks, pits or breaks in the concrete can be patched and then painted with Patio Tones to restore the original beauty of your pool deck or patio. Patio Tones can be rolled on wet surfaces and cleans with water. All concrete surfaces must be properly cleaned prior to the application of PAtio tones. After sweeping away loose debris, use a stiff bristle patio broom to scrub the surface with a solutioon of Tri-Sodium Phosphase and water. This will remove sun tan lotion and oils which inhibit the penetration of Patio tones. The surface should be throughly rinsed with water. Using a 10% soultion of Muriatic acid, scrub the deck again, this will remove mineral deposits and creates pores for be adhesion of the PAtio Tones paint. Finally use Tri-sodium Phosphate solution to neutralize any traces of acid, rinse and allow standing water to dissipate. Patio Tones may be rolled on wet concrete, but not through standing water or puddles. Two coats are required on bare concrete. The afirst coat should be thinned with 10-20% water.(if concrete is wet omit thining). Allow the first coat to dry a miniumum of one hour depending on the temperature. Apply the second coat full strength. ALLOW 24 hours to dry before allowing traffic to walk on the coating. Coverage:
80-120
square feet per gallon depending on the surface prorosity. Two coats are
require on bare concrete. |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Note:
Colors are approximate,variations in manufacture are possible. |
|||||||||||||||||||||||||||||||||||||||||||||